Unformatted text preview: tact Algorithm: Augmented Lagrangian - KEYOPT(2) = 0
• 2-D analysis with PLANE42 and CONTA175 • 3-D analysis with SOLID45 and CONTA175 • 2-D analysis with PLANE182 and CONTA175 • 3-D analysis with SOLID185 and CONTA175 Contact Algorithm: Lagrange Multiplier - KEYOPT(2) = 3
• 2-D analysis with PLANE42 and CONTA175 • 3-D analysis with SOLID45 and CONTA175 • 2-D analysis with PLANE182 and CONTA175 • 3-D analysis with SOLID 185 and CONTA175 Plane stress condition is modeled using a unit thickness slice through the cylinders. The region modeled is shown
shaded in the problem sketch. The ESURF command is used to automatically generate the contact and target
elements between “contactor” nodes on the upper cylinder and “target” nodes on the lower cylinder. The default
value of contact stiffness FKN is chosen while performing a solution using Augmented Lagrangian contact algorithm (KEYOPT(2) = 0) whereas no contact stiffness input is required to be specified while performing a solu...
View Full Document
This note was uploaded on 12/09/2010 for the course DEPARTMENT E301 taught by Professor Kulasinghe during the Spring '09 term at University of Peradeniya.
- Spring '09
- The Land