00136 kg sec the wall shear stress is 1270 ansys

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: Ts, °F 417.9 416.5 0.997 q, Btu/hr SOLID69 Ratio Ts, °F PLANE67 ANSYS 341.5 339.8[3] 0.995 1. Solution recalculated 2. Total Joule heat rate/radian x 2 π 3. Calculated from heat flow rate per 10° sector x 36 sectors 1–266 ANSYS Verification Manual . ANSYS Release 9.0 . 002114 . © SAS IP, Inc. VM120: Microstrip Transmission Line Capacitance Overview Reference: J. Beren, R. Kaires, “EMGAP Solves Electromagnetic Problems Using Finite Element Analysis”, Tektronix Internal Publication, Beaverton, OR, May 1983. Analysis Type(s): Electrostatic Analysis (ANTYPE = 0) Element Type(s): 2-D 8-Node Electrostatic Solid Element (PLANE121) Input Listing: vm120.dat Test Case A shielded microstrip transmission line consists of a substrate, microstrip, and a shield. The strip is at a potential V1, and the shield is at a potential V0. Determine the capacitance of the transmission line. Figure 120.1 Microstrip Transmission Line Problem Sketch Material Properties ε0 = 8.85 x 10-12 F/m ε1 = 8.85 x 10-11 F/m Geometric Properties a = 10 cm b = 1 cm w = 1 cm Loading V1 = 1.5 v V0 =...
View Full Document

Ask a homework question - tutors are online