This preview shows page 1. Sign up to view the full content.
Unformatted text preview: : T. F. Soules, R. F. Busbey, S. M. Rekhson, A. Markkovsky, M. A. Burkey, “Finite
Element Calculations of Residual Stresses in Glass Parts Using MARC”, General
Electric Company (Nela Park), Report # 86-LRL-2022, Cleveland, OH, March
1986. Analysis Type(s): Static Analysis (ANTYPE = 0) Element Type(s): 2-D 8-Node Viscoelastic Solid Elements (VISCO88)
3-D 20-Node Viscoelastic Solid Elements (VISCO89) Input Listing: vm200.dat Test Case
A sandwich seal made of an alumina plate with G-11 glass cladding on both sides is cooled at 3° per minute from
618°C to 460°C and held isothermally for four hours. The seal is further cooled at 3° per minute to 18°C. FInd the
maximum in-plane stress (σmax) developed in the seal along with the corresponding temperature. Figure 200.1 Viscoelastic Sandwich Seal Problem Sketch ANSYS Verification Manual . ANSYS Release 9.0 . 002114 . © SAS IP, Inc. 1–452 VM200
Material: G-11 Glass
H/R (°K) = 6.45e4
X = 0.53
No. of Maxwell Elements = 6
For Volume Decay F...
View Full Document
This note was uploaded on 12/09/2010 for the course DEPARTMENT E301 taught by Professor Kulasinghe during the Spring '09 term at University of Peradeniya.
- Spring '09
- The Land