1 orthotropic solid problem sketch ansys verification

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: for Stress and Strain, McGraw-Hill Book Co., Inc., New York, NY, 1975, pg. 112-114, article 7.2. Analysis Type(s): Static Analysis (ANTYPE = 0) Element Type(s): Linear Layered Structural Shell Elements (SHELL99) 3-D 8-Node Layered Structural Solid Elements (SOLID46) Input Listing: vm144.dat Test Case A beam of length and width w, made up of two layers of different materials, is subjected to a uniform rise in temperature from Tref to To and a bending moment My at the free-end. Determine the free-end displacement δ (in the Z-direction) and the X- direction stresses at the top and bottom surfaces of the layered beam. Ei and αi correspond to the Young's modulus and thermal coefficient of expansion for layer i, respectively. Figure 144.1 Composite Beam Problem Sketch r A @8 h tA s § © ¨ © ¨  g ¥© ¦© ¨¡ §¡ ¥ ¦¡ § ¨ ¥ ¡ ¦¡ § ¦ ¡ © £ ¡ ¤¡ ¤ ¥ E © ©© £ © g ¡ A @8 h F ¤ £ ©¡ ¡ ¡ © £ ¢ ¡ p qi ¡ ¡ F H Y DA 87 CB# 5@95 256¥2£ 4120(!'%# ...
View Full Document

Ask a homework question - tutors are online