1 short solid cylinder problem sketch material

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: [1] ANSYS Ratio T, °F (at Node 4) 27.6 27.8 1.01 T, °F (at Node 5) 32.7 32.8 1.00 T, °F (at Node 6) 9.5 9.5 1.00 ANSYS Verification Manual . ANSYS Release 9.0 . 002114 . © SAS IP, Inc. 1–223 VM99 Target[1] T, °F (at Node 7) q, Btu/hr ANSYS Ratio 10.7 10.7 1.00 3545.[2] 3482. 0.982 1. Based on a numerical relaxation method. 2. Solution recalculated. 1–224 ANSYS Verification Manual . ANSYS Release 9.0 . 002114 . © SAS IP, Inc. VM100: Heat Conduction Across a Chimney Section Overview Reference: F. Kreith, Principles of Heat Transfer, 2nd Printing, International Textbook Co., Scranton, PA, 1959, pg. 102, ex. 3-4. Analysis Type(s): Thermal Analysis (ANTYPE = 0) Element Type(s): 2-D Thermal Solid Elements (PLANE55) Input Listing: vm100.dat Test Case Determine the temperature distribution and the rate of heat flow q per foot of height for a tall chimney whose cross-section is shown in Figure 100.1: “Heat Conduction Across a Chimney Section Problem Sketch”. Assume that the inside gas...
View Full Document

This note was uploaded on 12/09/2010 for the course DEPARTMENT E301 taught by Professor Kulasinghe during the Spring '09 term at University of Peradeniya.

Ask a homework question - tutors are online