106 thermal analysis antype 4 2 d 8 node thermal solid

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: . ANSYS Verification Manual . ANSYS Release 9.0 . 002114 . © SAS IP, Inc. 1–67 VM26 Results Comparison Target1 Ratio UX, node 4 (mm) -2.9 -2.61 0.90 UZ, node 4 (mm) -6.5 -6.55 1.01 1.26 1.22 0.97 94.25 94.25 1.00 UX, node 4 (mm) -2.9 -2.77 0.95 UZ, node 4 (mm) -6.5 -6.71 1.03 ROTY, node 4 (rad) 1.26 1.26 1.00 Stressx , node 1 (N/mm2) SHELL43 ANSYS 94.25 94.25 1.00 ROTY, node 4 (rad) 2 Stressx , node 1 (N/mm ) SHELL181 1. 1–68 to accuracy of graphical readout ANSYS Verification Manual . ANSYS Release 9.0 . 002114 . © SAS IP, Inc. VM27: Thermal Expansion to Close a Gap Overview Reference: C. O. Harris, Introduction to Stress Analysis, The Macmillan Co., New York, NY, 1959, pg. 58, problem 8. Analysis Type(s): Static, Thermal-stress Analysis (ANTYPE = 0) Element Type(s): 2-D Spar (or Truss) Elements (LINK1) 2-D Point-to-Point Contact Elements (CONTAC12) 3-D Spar (or Truss) Elements (LINK8) 3-D Point-to-Point Contact Elements (CONTAC52) Input Listing: vm27.dat Test Case An aluminum-alloy bar is fixed at o...
View Full Document

This note was uploaded on 12/09/2010 for the course DEPARTMENT E301 taught by Professor Kulasinghe during the Spring '09 term at University of Peradeniya.

Ask a homework question - tutors are online