1243 vm108 mode 1 angle 0 node 2 t f node 3 t f node

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: r from a black body of unit area A at a temperature T, when ambient temperature is Ta. Figure 106.1 Radiant Energy Emission Problem Sketch Material Properties ε = emissivity = 1.0 Geometric Properties A = 1 ft2 F = form factor = 1.0 Loading T = 3000°F Ta = 0°F Analysis Assumptions and Modeling Notes A conversion factor of 144 in2/ft2 is included in the area input to convert the default Stefan-Boltzmann constant to feet units. The temperature offset of 460°F is required to convert the input Fahrenheit temperature to an absolute (Rankine) temperature. The node locations are arbitrarily selected as coincident. Results Comparison Target q, Btu/hr 1. ANSYS[1] Ratio 2.4559 x 105 2.4552 x 105 1.000 Element heat rate ANSYS Verification Manual . ANSYS Release 9.0 . 002114 . © SAS IP, Inc. 1–240 VM107: Thermocouple Radiation Overview Reference: A. J. Chapman, Heat Transfer, The Macmillan Co, New York, NY, 1960, pg. 396, article 13.5. Analysis Type(s): Thermal analysis (ANTYPE = 0) Element Type(s): Radiation Link Elements (LINK31) Convection Link Elemen...
View Full Document

This note was uploaded on 12/09/2010 for the course DEPARTMENT E301 taught by Professor Kulasinghe during the Spring '09 term at University of Peradeniya.

Ask a homework question - tutors are online