This preview shows page 1. Sign up to view the full content.
Unformatted text preview: in 10 adaptive loops such that the error in the thermal energy norm over the entire model is within
5%. ANSYS Verification Manual . ANSYS Release 9.0 . 002114 . © SAS IP, Inc. 1–438 VM193
The model is created using solid model entities. A keypoint is specified at target location E to ensure that a node
is created at that location. All boundary conditions are applied on the solid model. The ADAPT macro is used to
invoke the automatic adaptive meshing procedure. Results Comparison
T, °C at point E ANSYS Ratio 18.3 18.2 0.997 Figure 193.2 Temperature Contour Plot ANSYS Verification Manual . ANSYS Release 9.0 . 002114 . © SAS IP, Inc. 1–439 VM194: Element Birth/Death in a Fixed Bar
Reference: Any standard mechanics of materials text Analysis Type(s): Static Analysis (ANTYPE = 0) Element Type(s): 2-D Spar (or Truss) Elements (LINK1) Input Listing: vm194.dat Test Case
A bar of uniform cross-section, fixed at both ends and subjected to a uniform thermal load (∆T) has its center
third removed. This is followed by replacing the removed part in a “...
View Full Document
- Spring '09
- The Land