2 1330 ansys verification manual ansys release 90

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: d Modeling Notes An axisymmetric model is used for the cone. The radiating surfaces are modeled using three LINK32 elements. The non-hidden method (VTYPE) is used since there are no blocking or obscuring surfaces within the enclosure (i.e. all radiating surfaces fully "see" each other). The radiation matrix is written using 50 circumferential divisions (GEOM). Since all the radiating surfaces form an enclosure, no space node is specified. Heat flux on the bottom ANSYS Verification Manual . ANSYS Release 9.0 . 002114 . © SAS IP, Inc. 1–325 VM147 surface is applied using SURF151 (surface effect element). The value of Stefan-Boltzmann constant is specified in consistent units as 5.6696E-8 W/m2-K. Results Comparison Non-hidden method Target ANSYS Ratio T1 , K 904 907 1.003 1–326 ANSYS Verification Manual . ANSYS Release 9.0 . 002114 . © SAS IP, Inc. VM148: Bending of a Parabolic Beam Overview Reference: S. Timoshenko, Strength of Material, Part I, Elementary Theory and Problems, 3rd Edition, D. Van Nostrand...
View Full Document

This note was uploaded on 12/09/2010 for the course DEPARTMENT E301 taught by Professor Kulasinghe during the Spring '09 term at University of Peradeniya.

Ask a homework question - tutors are online