This preview shows page 1. Sign up to view the full content.
Unformatted text preview: Contours in Coarse Model. Window 3: SX Stress Contours in Refined Model. 1–316 ANSYS Verification Manual . ANSYS Release 9.0 . 002114 . © SAS IP, Inc. VM143: Fracture Mechanics Stress for a Crack in a Plate
Reference: W. F. Brown, Jr., J. E. Srawley, “Plane Strain Crack Toughness Testing of High
Strength Metallic Materials”, ASTM STP-410, 1966. Analysis Type(s): Static Analysis (ANTYPE = 0) Element Type(s): 3-D 20-Node Structural Solid Elements (SOLID95)
3-D Structural Solid Elements (SOLID45)
2-D 8-Node Structural Solid Elements (PLANE82)
3-D 20-Node Structural Solid Elements (SOLID186)
3-D Structural Solid Elements (SOLID185) Input Listing: vm143.dat Test Case
A long plate with a center crack is subjected to an end tensile stress σo as shown in the problem sketch. Determine
the fracture mechanics stress intensity factor KI. Figure 143.1 Finite Width Plate Problem Sketch ANSYS Verification Manual . ANSYS Release 9.0 . 002114 . © SAS IP, Inc. 1–317 VM143
E = 30 x 106 psi
υ = 0.3 Geometric Propertie...
View Full Document
This note was uploaded on 12/09/2010 for the course DEPARTMENT E301 taught by Professor Kulasinghe during the Spring '09 term at University of Peradeniya.
- Spring '09
- The Land