ANSYS varification manual 9

# 3 vector display of magnetic field intensity ansys

This preview shows page 1. Sign up to view the full content.

This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: otential load is applied while setting initial boundary conditions of zero at all other potentials. Results Comparison t = 0.15 sec Target ANSYS Ratio Vector Potential (Wb/m) @ x = .2517 .831 .831 1.000 @ x = .4547 .282 .278 0.986 @ x = .6914 .050 .044 0.880 Flux Density (T) @ x = .2517 3.707 3.687 .0995 @ x = .4547 1.749 1.794 1.026 @ x = .6914 .422 .454 1.076 Eddy Current Density (x107A/m2) @ x = .2517 -.777 -.780 1.004 @ x = .4547 -.663 -.677 1.021 @ x = .6914 -.243 -.245 1.008 ANSYS Verification Manual . ANSYS Release 9.0 . 002114 . © SAS IP, Inc. 1–371 VM167 Figure 167.2 Vector Potential vs. Time Plot Figure 167.3 Eddy Current Density vs. Time Plot 1–372 ANSYS Verification Manual . ANSYS Release 9.0 . 002114 . © SAS IP, Inc. VM168: Magnetic Field in a Nonferrous Solenoid Overview Reference: W. B. Boast, Principles of Electric and Magnetic Fields, Harper & Brothers, New York, NY, 1948, pg. 243. Analysis Type(s): Static Magnetic Field Analysis (ANTYPE = 0) Element Type(s): 3-D Coupled-Field Solid Elements (SOLID5) Current Source Elements (SOU...
View Full Document

## This note was uploaded on 12/09/2010 for the course DEPARTMENT E301 taught by Professor Kulasinghe during the Spring '09 term at University of Peradeniya.

Ask a homework question - tutors are online