This preview shows page 1. Sign up to view the full content.
Unformatted text preview: 9.0 . 002114 . © SAS IP, Inc. 1–560 VM239
α2 = the angle of twist of the driven shaft
β = relative angle between axis of rotation of the shafts
The input rotation is next compared to the resulting rotation at node "d". The plot shows a linear relationship in
which the rotations at "a" should be equal to the rotations at "d".
Warning: The revolute joint at junction "e" is tested by comparing the results of the input
rotation at "a" (which is transferred perfectly to "d") with the linear, sliding motion generated by the slider-crank mechanism lying in the y-z plane. This relationship is defined in
the supplied reference, and reflected below in the results. Results Comparison
Input Rotation vs. Linear Motion of Slider-Crank Mechanism
Applied Rotation Target ANSYS Ratio Linear Motion (x) for π/4 (45°) 0.39708 0.39708 1:1 Linear Motion (x) for π/2 (90°) 0.58579 0.58579 1:1 Linear Motion (x) for 3π/4 (135°) 0.39708 0.39708 1:1 Linear...
View Full Document
This note was uploaded on 12/09/2010 for the course DEPARTMENT E301 taught by Professor Kulasinghe during the Spring '09 term at University of Peradeniya.
- Spring '09
- The Land