587 532 489 456 432 417 5840 ratio 1000 100 100 100

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: Inc. VM96: Temperature Distribution in a Short, Solid Cylinder Overview Reference: P. J. Schneider, Conduction Heat Transfer, 2nd Printing, Addison-Wesley Publishing Co., Inc., Reading, MA, 1957, pg. 134, fig. 6-7. Analysis Type(s): Thermal Analysis (ANTYPE = 0) Element Type(s): 3-D 10-Node Tetrahedral Thermal Solid Elements (SOLID87) Input Listing: vm96.dat Test Case A short, solid cylinder is subjected to the surface temperatures shown. Determine the temperature distribution within the cylinder Figure 96.1 Short, Solid Cylinder Problem Sketch Material Properties k = 1.0 Btu/hr-ft-°F Geometric Properties r= = 0.5 ft Loading Ttop = 40°F Tbot = Twall = 0°F ANSYS Verification Manual . ANSYS Release 9.0 . 002114 . © SAS IP, Inc. 1–217 VM96 Analysis Assumptions and Modeling Notes Since the problem is axisymmetric, the entire cylinder geometry is not required. An angle Θ = 45° is arbitrarily chosen. Postprocessing is used to print temperatures at the centerline in geometric order. A finer mesh density (than required for reasonable results) is used to...
View Full Document

This note was uploaded on 12/09/2010 for the course DEPARTMENT E301 taught by Professor Kulasinghe during the Spring '09 term at University of Peradeniya.

Ask a homework question - tutors are online