ANSYS varification manual 9

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: = 8 in) p = 30,000 psi ANSYS 20000. 19993. 1.000 0.0 49.380 -- Stresst, psi (r = 4 in) 40588. 40526. 0.998 Stressr, psi (r = 5.43 in) 4753. 4745. 0.998 Stresst, psi (r = 5.43 in) 29436. 29406. 0.999 Displacementr, in (r = 4 in) Rotation = 1000 rad/sec Stressr, psi (r = 4 in) ANSYS Verification Manual . ANSYS Release 9.0 . 002114 . © SAS IP, Inc. 1–65 VM25 Figure 25.2 SZ Stresses Along a Section (Internal Pressure) Figure 25.3 SX Stresses Along a Section (Internal Pressure) 1–66 ANSYS Verification Manual . ANSYS Release 9.0 . 002114 . © SAS IP, Inc. VM26: Large Deflection of a Cantilever Overview Reference: K. J. Bathe, E. N. Dvorkin, "A Formulation of General Shell Elements - The Use of Mixed Interpolation of Tensorial Components”, Int. Journal for Numerical Methods in Engineering, Vol. 22 No. 3, 1986, pg. 720. Analysis Type(s): Static, Large Deflection Analysis (ANTYPE = 0) Element Type(s): 4-Node Plastic Large Strain Shell Elements (SHELL43) 4-Node Finite Strain Shell (SHELL181) In...
View Full Document

This note was uploaded on 12/09/2010 for the course DEPARTMENT E301 taught by Professor Kulasinghe during the Spring '09 term at University of Peradeniya.

Ask a homework question - tutors are online