ANSYS varification manual 9

# 7 563 222 932 546 214 876 475 183 296 117 47 7752

This preview shows page 1. Sign up to view the full content.

This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: c., Reading, MA, 1957, pg. 164, Article 7-8. Analysis Type(s): Thermal Analysis (ANTYPE = 0) Element Type(s): 2-D Thermal Solid Elements (PLANE55) Input Listing: vm99.dat Test Case A rectangular cooling fin with a trapezoidal cross-section dissipates heat from a wall maintained at a temperature Tw. The surrounding air temperature is Ta and the convection coefficient between the fin and the air is h. Determine the temperature distribution within the fin and the heat dissipation rate q. Figure 99.1 Trapezoidal Fin Problem Sketch Material Properties k = 18 Btu/hr-ft-°F h = 500 Btu/hr-ft2-°F Geometric Properties w = 0.96 in = 0.08 ft Loading Tw = 100°F Ta = 0°F Analysis Assumptions and Modeling Notes The finite element model is made the same as the reference's relaxation model for a direct comparison. The solution is based on a fin of unit depth (Z-direction). Only half of the fin is modeled due to symmetry. POST1 is used to extract results from the solution phase. Results Comparison Target...
View Full Document

## This note was uploaded on 12/09/2010 for the course DEPARTMENT E301 taught by Professor Kulasinghe during the Spring '09 term at University of Peradeniya.

Ask a homework question - tutors are online