85 x 10 11 fm geometric properties a 10 cm b 1 cm w 1

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: ith a straight-sided element. Nodal coupling is used to ensure circumferential symmetry. The solution is based on a wire 1 foot long (Z-direction). POST1 is used to extract results from the solution phase. Total heat dissipation is computed parametrically at the outer surface as HRATE using q = h.area.(Ts - Ta). Results Comparison Target 419.9 418.6 0.997 417.9 416.5 0.997 341.5 339.8 0.995 Centerline Temperature, °F 419.9 418.6 0.997 Ts, °F 417.9 416.5 0.997 q, Btu/hr 1–264 Centerline Temperature, °F q, Btu/hr SOLID70 Ratio Ts, °F PLANE55 ANSYS 341.5 339.8 0.995 ANSYS Verification Manual . ANSYS Release 9.0 . 002114 . © SAS IP, Inc. VM119: Centerline Temperature of an Electrical Wire Overview Reference: W. M. Rohsenow, H. Y. Choi, Heat, Mass and Momentum Transfer, 2nd Printing, Prentice-Hall, Inc., Englewood Cliffs, NJ, 1963, pg. 106, ex. 6.5. Analysis Type(s): Thermal Analysis (ANTYPE = 0) Element Type(s): 2-D Coupled Thermal-Electric Solid Elements (PLANE67) 3-D Coupled Thermal-El...
View Full Document

This note was uploaded on 12/09/2010 for the course DEPARTMENT E301 taught by Professor Kulasinghe during the Spring '09 term at University of Peradeniya.

Ask a homework question - tutors are online