934 0959 0960 sx3 992 996 997 1037 1006 999 1000 1003

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: and textbook problems. Where applicable, test cases that conform to published benchmark specifications are identified. 2.2. Benchmark Test Case Content and Nomenclature Format and content for the benchmark test cases are as follows: • Overview--a list of the major reference for the problem, the analysis type, the element type(s), and the name of the test case file (in the printed manual) or a link to the test case file (in the online version). • Test Case--a brief description of the problem and desired solution output. Also included are necessary material properties, geometric properties, loadings, boundary conditions, and parameter definitions. The parameters listed in the parameter definition area are used to define model variables that distinguish each test case run. Each test case is uniquely defined by these parameters and noted in the Results Comparison section. • Representative Mesh Options--a graphics display of a sampling of the finite element meshes created by the test. Parameters defined in the Test Case section ar...
View Full Document

This note was uploaded on 12/09/2010 for the course DEPARTMENT E301 taught by Professor Kulasinghe during the Spring '09 term at University of Peradeniya.

Ask a homework question - tutors are online