987 1000 0999 1031 0999 0990 1000 0999 0000 1030 1000

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: esponse curve. POST26 is used to get an amplitude versus frequency display. Results Comparison Target ANSYS Ratio X1 , in (f = 1.5 Hz)[1] 0.82272 0.82272 1.000 Angle1, deg (f = 1.5 Hz) 0.0000 0.0000 - X2 , in (f = 1.5 Hz)[1] 0.46274 0.46274 1.000 0.000 0.0000 - X1 , in (f = 4.0 Hz) 0.51145 0.51146 1.000 Angle1, deg (f = 4.0 Hz) 180.00 180.00 1.000 X2 , in (f = 4.0 Hz) 1.2153 1.2153 1.000 Angle2, deg (f = 4.0 Hz) 180.00 180.00 1.000 X1 , in (f = 6.5 Hz) 0.58513 0.58512 1.000 Angle1, deg (f = 6.5 Hz) 180.00 180.00 1.000 X2 , in (f = 6.5 Hz) 0.26966 0.26965 1.000 Angle2, deg (f = 6.5 Hz) 0.0000 0.0000 - Angle2, deg (f = 1.5 Hz) 1. X1 = UX @ m1 (node 2) X2 = UX @ m2 (node 3) ANSYS Verification Manual . ANSYS Release 9.0 . 002114 . © SAS IP, Inc. 1–205 VM90 Figure 90.2 Amplitude vs. Frequency 1–206 ANSYS Verification Manual . ANSYS Release 9.0 . 002114 . © SAS IP, Inc. VM91: Large Rotation of a Swinging Pendulum Overview Reference: W. T. Thomson, Vibration Theory and Applications, 2nd Printing, Prentice-Hall, Inc., Eng...
View Full Document

This note was uploaded on 12/09/2010 for the course DEPARTMENT E301 taught by Professor Kulasinghe during the Spring '09 term at University of Peradeniya.

Ask a homework question - tutors are online