Ab r r dab x x2 ansys verification manual ansys

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: 95 3.395 1.00 Real solution, Amps 1.192 1.19209 1.00 Imag solution, Amps -1.621 -1.62063 1.00 ANSYS Verification Manual . ANSYS Release 9.0 . 002114 . © SAS IP, Inc. 1–469 VM207: Stranded Coil Excited by External Circuit Overview Reference: W. B. Boast, Principles of Electric and Magnetic Fields, Harper & Brothers, New York, NY, 1948, pg. 247, eq. 12.18. Analysis Type(s): Static Element Type(s): 2-D 8-Node Magnetic Solid Elements (PLANE53) 2-D Infinite Solid Elements (INFIN110) Electric Circuit Elements (CIRCU124) Input Listing: vm207.dat Test Case A stranded coil with 500 turns and a fill factor of 0.9 is connected to an external circuit consisting of an independent voltage source and a 2 ohm resistor. A static analysis is run with a 12 volt DC excitation to determine the coil resistance and inductance. A transient analysis is run to calculate the coil current response to a step 12 volt excitation. Figure 207.1 Stranded Coil Problem Sketch Material Properties Rext = 2 Ω µr = 1.0 (coil) µr = 1.0 (air) ρ = 3.04878 x 10-8 ohm-m (coil) Geometric Properties N = 500 turns S = .02 m R = 3(s)/2 m FC = .9 Fill fac...
View Full Document

This note was uploaded on 12/09/2010 for the course DEPARTMENT E301 taught by Professor Kulasinghe during the Spring '09 term at University of Peradeniya.

Ask a homework question - tutors are online