This preview shows page 1. Sign up to view the full content.
Unformatted text preview: oil current is compared to the solution current. The coil current response
is plotted versus time. Results Comparison
Target Transient Analysis Ratio Inductance, Henry .01274 0.01275 1.00 Resistance, Ohm Static Analysis ANSYS 3.991 3.99084 1.00 Current, Amps 1.985 1.98324 .999 Figure 207.2 Current vs. Time ANSYS Verification Manual . ANSYS Release 9.0 . 002114 . © SAS IP, Inc. 1–471 VM208: RL Circuit with Controlled Source
Reference: J. O'Malley, Schaum's Outline of Theory and Problems of Basic Circuit Analysis,
2nd Edition, McGraw-Hill Book Co., Inc., New York, NY, 1992, Problem 14.23,
Figure 14.25. Analysis Type(s): Harmonic Element Type(s): Electric Circuit Elements (CIRCU124) Input Listing: vm208.dat Test Case
A circuit consists of 2 resistors, an inductor, an independent voltage source, an independent current source, and
a current-controlled current source. Determine the voltage at node 4 in the circuit. Figure 208.1 RL Circuit Problem Sketch Circuit Values
R1 = 3 Ω
R2 = 2 Ω...
View Full Document
This note was uploaded on 12/09/2010 for the course DEPARTMENT E301 taught by Professor Kulasinghe during the Spring '09 term at University of Peradeniya.
- Spring '09
- The Land