Ansys release 90 002114 sas ip inc 2q2phi51g fd 824

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: nverges toward the solution from above the target temperature while, in general, the higher order PLANE35 and PLANE77 elements converge from below the target temperature. 2. For the coarse meshes, the lower order PLANE55 element, in triangular form, does not predict accurate results. However, further mesh refinement produces more accurate results. 3. The higher order PLANE35 triangular element and the higher order PLANE77 element in triangular form, produce identical results. ANSYS Verification Manual . ANSYS Release 9.0 . 002114 . © SAS IP, Inc. 2–25 VMC7: One-Dimensional Transient Heat Transfer Overview Reference: J. P. Holman, Heat Transfer, 4th Edition, McGraw-Hill Book Co., Inc., New York, NY, 1976, pg. 106. Analysis Type(s): Thermal Analysis (ANTYPE = 4) Element Type(s): 2-D 6-Node Triangular Thermal Solid Elements (PLANE35) 2-D Thermal Solid Elements (PLANE55) 2-D 8-Node Thermal Solid Elements (PLANE77) Input Listing: vmc7.dat Test Case A semi-infinite solid, initially of tempe...
View Full Document

This note was uploaded on 12/09/2010 for the course DEPARTMENT E301 taught by Professor Kulasinghe during the Spring '09 term at University of Peradeniya.

Ask a homework question - tutors are online