ANSYS varification manual 9

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: = -.6/ µ 0 The command macro POWERH is used to calculate the power loss in the cylinder. Vector array displays of the eddy currents in the cylinder is produced using the PLVJ3D command macro. The AMAP command is used to simplify the Mapped Meshing process. It eliminates the need for line concatenation, resulting in easier mesh extrusion into 3-D. Results Comparison Target ANSYS Ratio By (0,0), T .0542 .0533 1.017 Power loss, W 10062 9648 1.043 Figure 189.2 Vector Display of Eddy Current Density (Real) ANSYS Verification Manual . ANSYS Release 9.0 . 002114 . © SAS IP, Inc. 1–429 VM189 Figure 189.3 Vector Display of Eddy Current Density (Imaginary) 1–430 ANSYS Verification Manual . ANSYS Release 9.0 . 002114 . © SAS IP, Inc. VM190: Ferromagnetic Inductor Overview Reference: S. J. Chapman, Electric Machinery Fundamentals, McGraw-Hill Book Co., Inc., New York, NY, 1985, pg. 14, ex. 1-1. Analysis Type(s): Static Magnetic Field Analysis (ANTYPE = 0) Element Type(s): Tetrahedral Coupled-...
View Full Document

This note was uploaded on 12/09/2010 for the course DEPARTMENT E301 taught by Professor Kulasinghe during the Spring '09 term at University of Peradeniya.

Ask a homework question - tutors are online