Ansys verification manual ansys release 90 002114 sas

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: , 1959, pg. 239 Analysis Type(s): Static Analysis (ANTYPE = 0) Mode-frequency Analysis (ANTYPE = 2) Element Type(s): Elastic Shell Elements (SHELL63) 3-D Structural Solid Shell Elements (SOLSH190) Input Listing: vm54.dat Test Case A blade is cantilevered from a rigid rotating cylinder. Determine the fundamental frequency of vibration of the blade, f, when the cylinder is spinning at a rate of Ω . Figure 54.1 Rotating Cantilever Blade Material Properties E = 217 x 109 Pa ρ = 7850 kg/m3 υ = 0.3 Geometric Properties r = 150 mm Loading Ω = 100π rad/sec = 328 mm b = 28 mm t = 3mm ANSYS Verification Manual . ANSYS Release 9.0 . 002114 . © SAS IP, Inc. 1–128 VM54 Analysis Assumptions and Modeling Notes The problem is solved in two different ways: • Using Elastic Shell Elements (SHELL63) • Using 3-D Solid Shell Elements (SOLSH190) Spin (centrifugal) softening is used. Since the cylinder is rigid, the base of the blade has its displacements constrained. A static prestress analysis is performed to include...
View Full Document

This note was uploaded on 12/09/2010 for the course DEPARTMENT E301 taught by Professor Kulasinghe during the Spring '09 term at University of Peradeniya.

Ask a homework question - tutors are online