ANSYS varification manual 9

# All boundary conditions are applied on the solid

This preview shows page 1. Sign up to view the full content.

This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: ents (SOLID45) 2-D/3-D Node-to-Surface Contact Elements (CONTA175) 2-D Structural Solid Elements (PLANE182) 3-D Structural Solid Elements (SOLID185) Input Listing: vm191.dat Test Case Two long cylinders of radii R1 and R2, in frictionless contact with their axes parallel to each other are pressed together with a force per unit length, F. Determine the semi-contact length b and the approach distance d. Figure 191.1 Hertz Contact Between Two Cylinders Problem Sketch Material Properties Cylinder 1: E1 = 30000 N/mm2 υ1 = 0.25 Cylinder 2: E2 = 29120 N/mm2 υ2 = 0.3 Geometric Properties R1 = 10 mm R2 = 13 mm Loading F = 3200 N/mm ANSYS Verification Manual . ANSYS Release 9.0 . 002114 . © SAS IP, Inc. 1–433 VM191 Analysis Assumptions and Modeling Notes Each analysis uses two load steps; in the first load step a small imposed displacement is used on the upper cylinder to engage contact, whereas in the second load step the imposed displacement is deleted and the force load is applied. The problem is solved in eight different ways: Con...
View Full Document

## This note was uploaded on 12/09/2010 for the course DEPARTMENT E301 taught by Professor Kulasinghe during the Spring '09 term at University of Peradeniya.

Ask a homework question - tutors are online