Also determine the normal force fn and sliding force

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: 0.00125 0.00125 1.000 ANSYS Verification Manual . ANSYS Release 9.0 . 002114 . © SAS IP, Inc. VM28: Transient Heat Transfer in an Infinite Slab Overview Reference: J. P. Holman, Heat Transfer, 4th Edition, McGraw-Hill Book Co., Inc., New York, NY, 1976, pg. 106. Analysis Type(s): Thermal Analysis (ANTYPE = 4) Element Type(s): 2-D 8-Node Thermal Solid Element (PLANE77) Input Listing: vm28.dat Test Case A semi-infinite solid is initially at temperature To. The solid is then suddenly exposed to an environment having a temperature Te and a surface convection coefficient h. Determine the temperature distribution through the solid after 2000 seconds. Figure 28.1 Infinite Slab Problem Sketch Material Properties k = 54 W/m°C ρ = 7833 kg/m3 c = 465 J/kg-°C Geometric Properties a=1m b = 0.1 m Loading To = 0°C Te = 1000°C h = 50 W/m2-°C ANSYS Verification Manual . ANSYS Release 9.0 . 002114 . © SAS IP, Inc. 1–71 VM28 Analysis Assumptions and Modeling Notes The width b of 0.1 m is arbitrarily selected for...
View Full Document

This note was uploaded on 12/09/2010 for the course DEPARTMENT E301 taught by Professor Kulasinghe during the Spring '09 term at University of Peradeniya.

Ask a homework question - tutors are online