Buckling analysis antype 1 static prestress analysis

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: fined to be zero. An iterative solution is required. A friction factor of 0.025 (input for MU) is assumed for a starting value. ANSYS Verification Manual . ANSYS Release 9.0 . 002114 . © SAS IP, Inc. 1–280 VM124 Results Comparison Target ANSYS Ratio w, lbfsec/ft 0.898 0.930[1] 1.04 Re 1.94 x 105 2.01 x 105 1.04 1. w is given by nodal flow at node 1. ANSYS Verification Manual . ANSYS Release 9.0 . 002114 . © SAS IP, Inc. 1–281 VM125: Radiation Heat Transfer Between Concentric Cylinders Overview Reference: F. Kreith, Principles of Heat Transfer, 2nd Printing, International Textbook Co., Scranton, PA, 1959, pg. 260. Analysis Type(s): Thermal Analysis (ANTYPE = 0) AUX12 (Radiation View Factor Utility) Element Type(s): 2-D Conduction Bar Elements (LINK32) Superelement (or Substructure) (MATRIX50) Input Listing: vm125.dat Test Case Two long concentric cylinders are held at constant temperatures T1 and T2. Determine the rate of radiative heat transfer between the cylinders. Figure 125.1 Concentric Cyl...
View Full Document

This note was uploaded on 12/09/2010 for the course DEPARTMENT E301 taught by Professor Kulasinghe during the Spring '09 term at University of Peradeniya.

Ask a homework question - tutors are online