This preview shows page 1. Sign up to view the full content.
Unformatted text preview: he material properties. POST26 is used
to extract the results from the solution phase. Results Comparison
VISCO88 Stressmax , MPa ANSYS Ratio 12.5 12.5 1.000 ANSYS Verification Manual . ANSYS Release 9.0 . 002114 . © SAS IP, Inc. 1–453 VM200
Temp, °C 460.0 1.000 Target ANSYS Ratio Stressmax , MPa 12.5 12.5 1.000 Temp, °C VISCO89 460.0 460.0 460.0 1.000 Figure 200.2 In-plane Stress Versus Temperature 1–454 ANSYS Verification Manual . ANSYS Release 9.0 . 002114 . © SAS IP, Inc. VM201: Rubber Cylinder Pressed Between Two Plates
Reference: T. Tussman, K-J Bathe, “A Finite Element Formulation for Nonlinear Incompressible Elastic and Inelastic Analysis”, Computers and Structures, Vol. 26 Nos 1/2,
1987, pp. 357-409. Analysis Type(s): Static Analysis (ANTYPE = 0) Element Type(s): 2-D 4-Node Mixed u-P Hyperelastic Solid Elements (HYPER56)
3-D 8-Node Mixed u-P Hyperelastic Solid Elements (HYPER58)
2-D 8-Node Mixed u-P Hyperelastic Solid Elements (HYPER74)
2-D/3-D Node-to-Surface Contact Elements (CONTA175) Input Listing:...
View Full Document
This note was uploaded on 12/09/2010 for the course DEPARTMENT E301 taught by Professor Kulasinghe during the Spring '09 term at University of Peradeniya.
- Spring '09
- The Land