Introducing a rate dependent material property to the

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: tion Manual . ANSYS Release 9.0 . 002114 . © SAS IP, Inc. VMC6: 2-D Heat Transfer With Convection Overview Reference: J. Barlow, G. A. O. Davis, “Selected FE Benchmarks in Structural and Thermal Analysis”, NAFEMS Rept. FEBSTA, Rev. 1, October 1986, Test No. T4 (modified). Analysis Type(s): Thermal Analysis (ANTYPE = 0) Element Type(s): 2-D 6-Node Triangular Thermal Solid Elements (PLANE35) 2-D Thermal Solid Elements (PLANE55) 2-D 8-Node Thermal Solid Elements (PLANE77) Input Listing: vmc6.dat Test Case A two-dimensional rectangular body is insulated at the left edge and has the bottom edge held at a prescribed temperature T1. Two other edges are subjected to a convection environment with a convection coefficient h and an ambient temperature T0. Determine the steady-state temperature on the right edge, at a location 0.2 m above the bottom (Target Point-1) for a series of test cases with increasing mesh refinements for each element type. Figure C6.1 2-D Rectangular Body Problem Sketch Material Properties k = 52 W/m...
View Full Document

This note was uploaded on 12/09/2010 for the course DEPARTMENT E301 taught by Professor Kulasinghe during the Spring '09 term at University of Peradeniya.

Ask a homework question - tutors are online