Results comparison target depthck in stresst psi

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: .832 0.832[1] 1.000 StressxTOP , psi 2258. 2258. 1.000 StressxBOT , psi 1731. 1731. 1.000 Disp .832 .832 1.00 PRS TP 2258 2257.57 1.00 RRS BTM SOLID46 model Displacement, in StressxBOT , psi SHELL99 model (with node offset) Ratio StressxTOP , psi SHELL99 model ANSYS 1731 1730.57 1.00 SOLID191 model 1. UZ at Nodes 9, 19, 29 2. Corresponding shell TOP stresses for selected elements representing the top layer 3. Corresponding shell BOT stresses for selected elements representing the bottom layer 1–320 ANSYS Verification Manual . ANSYS Release 9.0 . 002114 . © SAS IP, Inc. VM145: Stretching of an Orthotropic Solid Overview Reference: S. H. Crandall, N. C. Dahl, An Introduction to the Mechanics of Solids, McGrawHill Book Co., Inc., New York, NY, 1959, pg. 225. Section 14.64: SOLID64 - 3-D Anisotropic Structural Solid in the ANSYS, Inc. Theory Reference Analysis Type(s): Static Analysis (ANTYPE = 0) Element Type(s): 3-D Anisotropic Structural Solid Elements (SOLID64) Input Listing: vm145.dat Test Case A unit cube of side , having orthotropic material properties,...
View Full Document

This note was uploaded on 12/09/2010 for the course DEPARTMENT E301 taught by Professor Kulasinghe during the Spring '09 term at University of Peradeniya.

Ask a homework question - tutors are online