ANSYS varification manual 9

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: lutions are performed using default contact algorithm and the last four solution are performed using Lagrange multipliers method (KEYOPT(2) = 3 ) of contact elements. • The lower order 2-D model used HYPER56 with CONTA171 and TARGE169 elements. • A higher order 2-D model used HYPER74 with CONTA172 and TARGE169. • The lower order 3-D model used HYPER58 with CONTA173 and TARGE170. • The higher order 3-D model used HYPER158 with CONTA174 and TARGE170. • The lower order 2-D model used HYPER56 with CONTA171 and TARGE169 and solved using Lagrange Multipliers method. • A higher order 2-D model used HYPER74 with CONTA172 and TARGE169 and solved using Lagrange Multipliers method. • The lower order 3-D model used HYPER58 with CONTA173 and TARGE170 and solved using Lagrange Multipliers method. • The higher order 3-D model used HYPER158 with CONTA174 and TARGE170 and solved using Lagrange Multipliers method. Results Comparison Target[1] 0.26 1.038 1.40 1.39 0.991 Force at Displacement = 0.1 0.25 0.26 1.036 1.40 1.40 0.998 Force at Displacemen...
View Full Document

This note was uploaded on 12/09/2010 for the course DEPARTMENT E301 taught by Professor Kulasinghe during the Spring '09 term at University of Peradeniya.

Ask a homework question - tutors are online