This preview shows page 1. Sign up to view the full content.
Unformatted text preview: e within the element (1/12 ft), and α is the
thermal diffusivity k/γc = 0.003 ft2/hr). POST26 and POST1 are used to obtain the surface temperature history
and the temperature distribution at the final time step, respectively. ANSYS Verification Manual . ANSYS Release 9.0 . 002114 . © SAS IP, Inc. 1–258 VM116 Results Comparison
Time = 7 hr Target ANSYS Ratio T, °F (at X = 0.0 in) 285. 293. 1.03 1. Based on graphical estimates 2. Temperature at Node 2 Figure 116.2 Surface Temperature History Plot ANSYS Verification Manual . ANSYS Release 9.0 . 002114 . © SAS IP, Inc. 1–259 VM116 Figure 116.3 Temperature Distribution Across Thickness Plot 1–260 ANSYS Verification Manual . ANSYS Release 9.0 . 002114 . © SAS IP, Inc. VM117: Electric Current Flowing in a Network
Reference: A. E. Fitzgerald, D. E. Higginbotham, Basic Electrical Engineering, 2nd Edition,
McGraw-Hill Book Co., Inc., New York, NY, 1957, pg. 22, ex. 1-11. Analysis Type(s): Thermal (electrical) Analysis (ANTYPE = 0) Element Type(s): Co...
View Full Document
This note was uploaded on 12/09/2010 for the course DEPARTMENT E301 taught by Professor Kulasinghe during the Spring '09 term at University of Peradeniya.
- Spring '09
- The Land