The 2 d mesh creates a 3 d mesh of solid122 elements

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: ires. In POST1 electric potential V at angles 0 to 90° (with 10 divisions) on the outer surface of radius 470 mm are retrieved and written by *VWRITE command. Results Comparison V (Volt) Target ANSYS Ratio @ Angle 0° 105.05 105.79 1.01 @ Angle 9° 99.90 100.62 1.01 @ Angle 18° 84.98 85.59 1.01 @ Angle 27° 61.74 62.18 1.01 @ Angle 36° 32.46 32.69 1.01 @ Angle 45° 0.0000 0.0000 0.0 @ Angle 54° -32.46 -32.69 1.01 @ Angle 63° -61.74 -62.18 1.01 @ Angle 72° -84.98 -85.59 1.01 @ Angle 81° -99.98 -100.62 1.01 @ Angle 90° -105.05 -105.79 1.01 ANSYS Verification Manual . ANSYS Release 9.0 . 002114 . © SAS IP, Inc. 1–117 VM50: Fundamental Frequency of a Simply Supported Beam Overview Reference: W. T. Thomson, Vibration Theory and Applications, 2nd Printing, Prentice-Hall, Inc., Englewood Cliffs, NJ, 1965, pg. 18, ex. 1.5-1 Analysis Type(s): Mode-frequency Analysis (ANTYPE = 2) Element Type(s): 2-D Elastic Beam Elements (BEAM3) Input Listing: vm50.dat Test Case Determine the fundamental f...
View Full Document

This note was uploaded on 12/09/2010 for the course DEPARTMENT E301 taught by Professor Kulasinghe during the Spring '09 term at University of Peradeniya.

Ask a homework question - tutors are online