The higher order elements plane2 and plane82 exhibit

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: X X Table 2.4 Analysis Type Coverage Test Case No. ANTYPE Analysis Type 0 C1 X C3 X C4 X C5 X C6 X C7 X C8 X D1 X D2 X D3 2–4 4 X C2 2 X ANSYS Verification Manual . ANSYS Release 9.0 . 002114 . © SAS IP, Inc. VMC1: Built-In Plate Under Uniformly Distributed Load Overview Reference: S. Timoshenko, S, Woinowsky-Knieger, Theory of Plates and Shells, McGraw-Hill Book Co., Inc., New York, NY, 1959, pg. 202, Approximate Solution Analysis Type(s): Static Analysis (ANTYPE = 0) Element Type(s): 3-D Structural Solid Elements (SOLID45) 3-D 8-Node Structural Solid Elements (SOLID185) 3-D 10-Node Tetrahedral Structural Solid Elements (SOLID92, SOLID187) 3-D 20-Node Structural Solid Elements (SOLID95, SOLID186) Input Listing: vmc1.dat Test Case A rectangular plate with built-in edges is subjected to a uniform pressure load on the top and bottom surface. Monitor displacement and stress results at three target points for a series of mesh refinements for different elements. Compare the effect of in...
View Full Document

This note was uploaded on 12/09/2010 for the course DEPARTMENT E301 taught by Professor Kulasinghe during the Spring '09 term at University of Peradeniya.

Ask a homework question - tutors are online