The outer edge of the model is constrained in all

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: stress values for comparison: 2 = 1 [1 + α( T2 − T1 )] σ= E( 2 − 1) 1 Results Comparison Target ANSYS Ratio 1 - Equivalent Stress (von Mises) 300,000 302,106 1.007 2 - Equivalent Stress (von Mises) 150,000 151,083 1.007 Figure 240.2 Stress Results in Composite Material 1–564 ANSYS Verification Manual . ANSYS Release 9.0 . 002114 . © SAS IP, Inc. VM241: Static Force Computation of a 3-D Solenoid Actuator Overview Reference: M. Gyimesi, D. F. Ostergaard, “Analysis of Benchmark Problem TEAM20 with Various Formulations”, Proceedings of TEAM Workshop, COMPUMAG, Rio, 1997. M. Gyimesi, D. F. Ostergaard, “Mixed Shape Non-Conforming Edge Elements”, IEEE Transactions on Magnetics, Vol. 35 No. 3, 1999, pp. 1407-1409. M. Gyimesi, D. F. Ostergaard, “Non-Conforming Hexahedral Edge Elements for Magnetic Analysis”, IEEE Transactions on Magnetics, Vol 34 No. 5, 1998, pp. 2481-2484. Analysis Type(s): Static (ANTYPE = 0) Element Type(s): Tetrahedral Coupled-Field Solid Elements (SOLID117) Input Listing: vm241.dat Test Case For...
View Full Document

This note was uploaded on 12/09/2010 for the course DEPARTMENT E301 taught by Professor Kulasinghe during the Spring '09 term at University of Peradeniya.

Ask a homework question - tutors are online