The seal is further cooled at 3 per minute to 18c

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: s created. The volume is obtained with the *GET command and is compared to the theoretical volume which is calculated using parameters. Results Comparison Target Volume ANSYS Ratio 79063. 79068. 1.000 ANSYS Verification Manual . ANSYS Release 9.0 . 002114 . © SAS IP, Inc. 1–446 VM198: Large Strain In-plane Torsion Test Overview Reference: J. C. Nagtegaal, J. E. DeJong, “Some Computational Aspects of Elastic-Plastic Strain Analysis”, Intl J. of Numerical Methods in Engineering, Vol. 17, 1981, pp. 15–41. Analysis Type(s): Static Analysis (ANTYPE = 0) Element Type(s): 2-D 4-Node Viscoplastic Solid Elements (VISCO106) 3-D 8-Node Viscoplastic Solid Elements (VISCO107) 2-D 8-Node Viscoplastic Solid Elements (VISCO108) Input Listing: vm198.dat Test Case A hollow, thick-walled, long cylinder made of an elastoplastic material is under an in-plane torsional loading which causes the inner surface of the cylinder to undergo a rotation of 60°. Find the maximum shear stress (τmax) developed at the inner surface at the end of loading. Figure 198.1 Large Strain In-plane Problem Sketch Material Properties...
View Full Document

Ask a homework question - tutors are online