Timoshenko strength of material part ii elementary

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: ter collapse. Sliding status of the combination elements indicates that a plastic hinge has formed. Results Comparison Target 1–90 -0.02829 1.00 RA lb 148.15 148.15 1.00 27778 27778 1.00 Hinge @ B Elastic Elastic - Plastic Sliding - Hinge @ B Plastic Sliding - Hinge @ C P = 1390 lbs -0.02829 Hinge @ C P = 1388.8 lbs Ratio Mc in-lb P = 1000 lbs (elastic) ANSYS Plastic Sliding - Deflection, in ANSYS Verification Manual . ANSYS Release 9.0 . 002114 . © SAS IP, Inc. VM37: Elongation of a Solid Bar Overview Reference: C. O. Harris, Introduction to Stress Analysis, The Macmillan Co., New York, NY, 1959, pg. 237, problem 4. Analysis Type(s): Static Analysis (ANTYPE = 0) Element Type(s): 3-D Structural Solid Elements (SOLID45) 3-D Structural Solid Elements (SOLID185) 3-D Structural Solid Shell Elements (SOLSH190) Input Listing: vm37.dat Test Case A tapered aluminum alloy bar of square cross-section and length L is suspended from a ceiling. An axial load F is applied to the free end of the bar. D...
View Full Document

This note was uploaded on 12/09/2010 for the course DEPARTMENT E301 taught by Professor Kulasinghe during the Spring '09 term at University of Peradeniya.

Ask a homework question - tutors are online