Dat test case a rigid ball of mass m is dropped

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: 259.16 261.11 1.008 1–146 ANSYS Verification Manual . ANSYS Release 9.0 . 002114 . © SAS IP, Inc. VM63: Static Hertz Contact Problem Overview Reference: S. Timoshenko, J. N. Goodier, Theory of Elasticity, 3rd Edition, McGraw-Hill Book Co., Inc., New York, NY, 1970, pg. 409-413, article 140. Analysis Type(s): Static Analysis (ANTYPE = 0) Element Type(s): 2-D 8-Node Structural Solid Elements (PLANE82 ) 2-D 6-Node Triangular Structural Solid Elements (PLANE2) 3-D Node-to-Node Contact Elements (CONTA178) Input Listing: vm63.dat Test Case A sphere of radius r is pressed against a rigid flat plane. Determine the contact radius, a, for a given load F. Figure 63.1 Static Hertz Problem Material Properties E = 1000 N/mm2 υ = 0.3 Geometric Properties r = 8 mm Loading F = (30 x 2 π) N Analysis Assumptions and Modeling Notes An axisymmetric model is used. A node is placed near the expected radius of contact. Midside nodes are removed along the surface where contact is likely to occur. The model is comprised of both PLANE82 and PLANE2 for ANSYS Verification Manual . ANSYS Release...
View Full Document

This note was uploaded on 12/09/2010 for the course DEPARTMENT E301 taught by Professor Kulasinghe during the Spring '09 term at University of Peradeniya.

Ask a homework question - tutors are online