Dat test case a well mixed fluid is heated by a long

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: in(t=period) 0.0000 -0.1749 0.000 1–208 ANSYS Verification Manual . ANSYS Release 9.0 . 002114 . © SAS IP, Inc. VM91 Figure 91.2 Pendulum Swing ANSYS Verification Manual . ANSYS Release 9.0 . 002114 . © SAS IP, Inc. 1–209 VM92: Insulated Wall Temperature Overview Reference: F. Kreith, Principles of Heat Transfer, 2nd Printing, International Textbook Co., Scranton, PA, 1959, pg. 32, ex. 2-5. Analysis Type(s): Thermal Analysis (ANTYPE = 0) Element Type(s): Convection Link Elements (LINK34) 2-D Conduction Bar Elements (LINK32) Input Listing: vm92.dat Test Case A furnace wall consists of two layers, firebrick and insulating brick. The temperature inside the furnace is Tf and the inner surface convection coefficient is hi. The ambient temperature is Ta and the outer surface convection coefficient is ho. Neglect the thermal resistance of the mortar joints and determine the rate of heat loss through the wall q, the inner surface temperature Ti, and the outer surface temperature To. Figure 92.1 In...
View Full Document

This note was uploaded on 12/09/2010 for the course DEPARTMENT E301 taught by Professor Kulasinghe during the Spring '09 term at University of Peradeniya.

Ask a homework question - tutors are online