Unformatted text preview: on of the block. Results Comparison
Status Target ANSYS Ratio Fx = 5.76729 lb. Sticking Sticking -- ANSYS Verification Manual . ANSYS Release 9.0 . 002114 . © SAS IP, Inc. 1–73 VM29
Status Target ANSYS Ratio Fn , lb -95.942 -95.942 1.000 Fs , lb 28.783 28.783 1.000 Sliding Sliding -- Fn , lb -95.942 -95.942 1.000 Fs , lb 28.783 28.783 1.000 Fx = 5.76720 lb. 1–74 ANSYS Verification Manual . ANSYS Release 9.0 . 002114 . © SAS IP, Inc. VM30: Solid Model of Surface Fillet
Reference: D. R. Hose, I. A. Rutherford, "Benchmarks for Finite Element Pre-processors",
NAFEMS Ref: R0001, December 1993, pg. 23. Analysis Type(s): Solid Modeling Boolean Operations Element Type(s): Not Applicable Input Listing: vm30.dat Test Case
A rectangular plate and a trapezoidal plate intersect at an angle of 90° with a common radius fillet of 1 mm. The
edge of the fillet lies in a plane. From solid model construction, determine the accuracy of the fillet operation by
measuring the out-of-plane deviation of subsequent meshed n...
View Full Document
This note was uploaded on 12/09/2010 for the course DEPARTMENT E301 taught by Professor Kulasinghe during the Spring '09 term at University of Peradeniya.
- Spring '09
- The Land