Lab%207%20ME104%202008%20prelab

Lab%207%20ME104%202008%20prelab - Boolean ON (or OFF ) text...

Info iconThis preview shows pages 1–2. Sign up to view the full content.

View Full Document Right Arrow Icon
Pre-Lab 7 Please build the following VI prior to this lab: 1. Write_DigOut.vi ± Launch LabVIEW and build the VI shown in Figure 1. Each of the four buttons on the front panel is a Push Button that turns bright green when the button is pressed ON and turns dark green when the button is pressed OFF. To display the Boolean ON (or OFF ) text values for each square light, right-click on the square light and select Show>Boolean Text . You can move the
Background image of page 1

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
Background image of page 2
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: Boolean ON (or OFF ) text values using the Positioning tool. To combine the four Push Buttons into one element, use the Array control. In the Block Diagram, use a cluster Unbundle function to get the status from the error wire. Figure 1. This VI generates four digital output signals that is used to provide the stepping sequence for a four-phase unipolar stepper motor. Save this VI as Write_DigOut.vi . (Rev. 2007) 2...
View Full Document

This note was uploaded on 01/04/2011 for the course ME 104 taught by Professor Staff during the Spring '08 term at UCSB.

Page1 / 2

Lab%207%20ME104%202008%20prelab - Boolean ON (or OFF ) text...

This preview shows document pages 1 - 2. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online