ECE166 Laboratory 4-Fall 2009

ECE166 Laboratory - 2 Measure the noise from a 50 ohm load using a high gain amplifier chain and see the noise changing when we cool or heat the 50

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
1 ECE 166 – Microwave Circuits and Systems LABORATORY 4 – Week of November 16-20, 2009 Room 4704, EBU-1 NOISE and Noise Figure Measurements This lab will introduce you to a closer look at noise. We will do the following: 1) Measure the noise figure using the Y-Factor Method of a 2 GHz amplifier and a Hot/Cold Source.
Background image of page 1
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: 2) Measure the noise from a 50 ohm load using a high gain amplifier chain and see the noise changing when we cool or heat the 50 ohm load. The lab time is 1 hour. Please arrive promptly at your assigned time and immediately give your name to the TA. There will be 11-12 students maximum per lab....
View Full Document

This note was uploaded on 01/08/2011 for the course ECE ece166 taught by Professor Cs during the Fall '10 term at UCSD.

Ask a homework question - tutors are online