readme_idl2

readme_idl2 - TIME: Floating point array giving the UT time...

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
Content of IDL save files for IDL problem #2: Note: Fill values are denoted with -99 File: cat_poam3_v4.0.2000 ALTITUDE: Floating point array with 121 altitudes from 0-120 km. COMMENT: String array with 5 elements explaining some of the arrays. DATE: Long array with the dates of each measurement given as yyyymmdd. FDOY: Floating point array with the fractional day-of-year for each measurement. ID: A unique number that identifies each measurement LATITUDE: Latitude of the measurements. LONGITUDE: Longitude of the measurements. SCTYPE: This is a string that is either “r” or “s” signifying a “sunrise” or “sunset” occultation (see below).
Background image of page 1
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: TIME: Floating point array giving the UT time of day for each measurement (fractional hours from 0-24). File: o3_poam3_v4.0.2000 DEN: Floating point array that gives the ozone density profiles for each measurement. Units are molecules of ozone per cm 3 . ERR: Floating point array that gives the % error for each ozone measurement. MASK: Floating point array that indicates bad measurements (-99 means bad). MIX: Floating point array that gives the ozone mixing ratio profiles for each measurement. Units are molecules of ozone per total molecules (multiply by 10 6 to get parts per million by volume, ppmv)....
View Full Document

This note was uploaded on 01/19/2011 for the course ATOC 5235 taught by Professor Randell during the Fall '10 term at Colorado.

Ask a homework question - tutors are online