Design_Project_2_fall2010 - Copy

# Design_Project_2_fall2010 - Copy - Fall 2010 EERF 6311...

This preview shows pages 1–2. Sign up to view the full content.

Fall 2010 EERF 6311 Design Project #2, Dividers and Couplers 1. A three-port network has the scattering matrix shown below: Describe the function of the network. Give as many properties of this network as possible. 2. 1. A three-port network has the scattering matrix shown below: Describe the function of the network. Give as many properties of this network as possible. 3. Consider the following 3-port network: Find at what frequency the input port is matched. 4. Design a three-port resistive divider for an equal power split (3-dB) and a 100 Ohm system impedance. How much power is lost in each arm of the divider? Calculate the change in output power in port 3 (in dB) when port 2 is connected to a load producing a reflection coefficient of 0.3. Simulate a microstrip design and plot the following: for the matched case and when port 2 is mismatched.

This preview has intentionally blurred sections. Sign up to view the full version.

View Full Document
Plot S21 and S31 (insertion loss), S11 (input return loss) and S32 (isolation) magnitude in dB for both designs.
This is the end of the preview. Sign up to access the rest of the document.

## This note was uploaded on 01/20/2011 for the course EE 6317 taught by Professor Cantrell during the Fall '08 term at University of Texas at Dallas, Richardson.

### Page1 / 2

Design_Project_2_fall2010 - Copy - Fall 2010 EERF 6311...

This preview shows document pages 1 - 2. Sign up to view the full document.

View Full Document
Ask a homework question - tutors are online