A1S - CHG 2314 HEAT TRANSFER Professor: B. Kruczek...

Info iconThis preview shows pages 1–5. Sign up to view the full content.

View Full Document Right Arrow Icon

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: CHG 2314 HEAT TRANSFER Professor: B. Kruczek 2005/01/14 Assignment No. 1 1. The hot combustion gases of a furnace are separated from the ambient air and its surroundings, which are at 25 o C, by a brick wall 0.15 m thick. The brick has a thermal conductivity of 1.2 W/m K and a surface emissivity of 0.7. Under the steady- state conditions an inner surface is at 350 o C. Free convection heat transfer to the air adjoining the outer surface is 20 W/m 2 K. What is the brick outer surface temperature? To reduce the risk of burn injuries to operating personnel, the outer surface should be maintained at or below 65 o C. What should be the minimum thickness of the brick wall to accomplish this goal? 2. Problem 1.38. 3. Problem 1.70. Due Date: Jan 21, 2005 at 4:00 p.m. in the assignment box. Problem 2 Known: 1. Initial temperature of water and tank volume 2. Power dissipation emissivity 3. Diameter and length of heater 4. Expressions for convection coefficient Unknown: 1. Time to raise temperature of water to prescribed value...
View Full Document

This note was uploaded on 01/27/2011 for the course CHG 2314 taught by Professor Kruz. during the Spring '10 term at University of Ottawa.

Page1 / 6

A1S - CHG 2314 HEAT TRANSFER Professor: B. Kruczek...

This preview shows document pages 1 - 5. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online