Chapter 7 Routing Textbook

Chapter 7 Routing Textbook - RIPv2 Routing Protocols and...

Info iconThis preview shows pages 1–7. Sign up to view the full content.

View Full Document Right Arrow Icon
© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public 1 Version 4.0 RIPv2 Routing Protocols and Concepts – Chapter 7
Background image of page 1

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
2 © 2007 Cisco Systems, Inc. All rights reserved. Cisco Public Objectives Encounter and describe the limitations of RIPv1’s limitations. Apply the basic Routing Information Protocol Version 2 (RIPv2) configuration commands and evaluate RIPv2 classless routing updates. Analyze router output to see RIPv2 support for VLSM and CIDR. Identify RIPv2 verification commands and common RIPv2 issues. Configure, verify, and troubleshoot RIPv2 in “hands- on” labs.
Background image of page 2
3 © 2007 Cisco Systems, Inc. All rights reserved. Cisco Public Introduction Chapter focus RIPv1 A classful distance vector routing protocol Does not support discontiguous subnets Does not support VLSM Does not send subnet mask in routing update Routing updates are broadcast RIPv2 A classless distance vector routing protocol that is an enhancement of RIPv1’s features Next hop address is included in updates Routing updates are multicast The use of authentication is an option
Background image of page 3

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
4 © 2007 Cisco Systems, Inc. All rights reserved. Cisco Public Introduction Use of timers to prevent routing loops Use of split horizon or split horizon with poison reverse Use of triggered updates Maximum hop count of 15
Background image of page 4
5 © 2007 Cisco Systems, Inc. All rights reserved. Cisco Public RIPv1 Limitations Lab Topology Scenario: 3 router set up Topology is discontiguous There exists a static summary route Static route information can be injected into routing table updates using redistribution Routers 1 & 3 contain VLSM networks
Background image of page 5

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public RIPv1 Limitations Scenario Continued VLSM Recall this is sub netting the subnet Private IP addresses are on LAN links Public IP addresses are
Background image of page 6
Image of page 7
This is the end of the preview. Sign up to access the rest of the document.

This note was uploaded on 02/01/2011 for the course IT 341 taught by Professor Staff during the Spring '08 term at George Mason.

Page1 / 26

Chapter 7 Routing Textbook - RIPv2 Routing Protocols and...

This preview shows document pages 1 - 7. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online