Midi - } void loop() { // play notes from F#-0 (0x1E) to...

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
/* MIDI note player This sketch shows how to use the serial transmit pin (pin 1) to send MIDI note data. If this circuit is connected to a MIDI synth, it will play the notes F#-0 (0x1E) to F#-5 (0x5A) in sequence. The circuit: * digital in 1 connected to MIDI jack pin 5 * MIDI jack pin 2 connected to ground * MIDI jack pin 4 connected to +5V through 220-ohm resistor Attach a MIDI cable to the jack, then to a MIDI synth, and play music. created 13 Jun 2006 modified 2 Jul 2009 by Tom Igoe This example code is in the public domain. http://www.arduino.cc/en/Tutorial/MIDI */ void setup() { // Set MIDI baud rate: Serial.begin(31250);
Background image of page 1
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: } void loop() { // play notes from F#-0 (0x1E) to F#-5 (0x5A): for (intnote = 0x1E; note < 0x5A; note ++) { //Note on channel 1 (0x90), some note value (note), middle velocity (0x45): noteOn(0x90, note, 0x45); delay(100); //Note on channel 1 (0x90), some note value (note), silent velocity (0x00): noteOn(0x90, note, 0x00); delay(100); } } // plays a MIDI note. Doesn't check to see that // cmd is greater than 127, or that data values are less than 127: void noteOn(int cmd, int pitch, int velocity) { Serial.print(cmd, BYTE); Serial.print(pitch, BYTE); Serial.print(velocity, BYTE); }...
View Full Document

Ask a homework question - tutors are online