PhysicalPixel - /* Physical Pixel An example of using the...

Info iconThis preview shows pages 1–4. Sign up to view the full content.

View Full Document Right Arrow Icon
/* Physical Pixel An example of using the Arduino board to receive data from the computer. In this case, the Arduino boards turns on an LED when it receives the character 'H', and turns off the LED when it receives the character 'L'. The data can be sent from the Arduino serial monitor, or another program like Processing (see code below), Flash (via a serial-net proxy), PD, or Max/MSP. The circuit: * LED connected from digital pin 13 to ground created 2006 by David A. Mellis modified 14 Apr 2009 by Tom Igoe and Scott Fitzgerald This example code is in the public domain. http://www.arduino.cc/en/Tutorial/PhysicalPixel */ const int ledPin = 13; // the pin that the LED is attached to int incomingByte; // a variable to read incoming serial data into i void setup() { // initialize serial communication: Serial.begin(9600); // initialize the LED pin as an output: pinMode(ledPin, OUTPUT); } void loop() { // see if there's incoming serial data: if (Serial.available() > 0) { // read the oldest byte in the serial buffer: incomingByte = Serial.read(); // if it's a capital H (ASCII 72), turn on the LED: if (incomingByte == 'H') { digitalWrite(ledPin, HIGH); } // if it's an L (ASCII 76) turn off the LED: if (incomingByte == 'L') { digitalWrite(ledPin, LOW); } } } /* Processing code for this example // mouseover serial // Demonstrates how to send data to the Arduino I/O board, in order to // turn ON a light if the mouse is over a square and turn it off // if the mouse is not.
Background image of page 1

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
// created 2003-4 // based on examples by Casey Reas and Hernando Barragan // modified 18 Jan 2009 // by Tom Igoe // This example code is in the public domain. import processing.serial.*; float boxX; float boxY; int boxSize = 20; boolean mouseOverBox = false; Serial port; void setup() { size(200, 200); boxX = width/2.0; boxY = height/2.0; rectMode(RADIUS); // List all the available serial ports in the output pane. // You will need to choose the port that the Arduino board is // connected to from this list. The first port in the list is // port #0 and the third port in the list is port #2. println(Serial.list()); // Open the port that the Arduino board is connected to (in this case #0) // Make sure to open the port at the same speed Arduino is using (9600bps) port = new Serial(this, Serial.list()[0], 9600); } void draw() { background(0); // Test if the cursor is over the box if (mouseX > boxX-boxSize && mouseX < boxX+boxSize && mouseOverBox = true; // draw a line around the box and change its color: stroke(255); fill(153); // send an 'H' to indicate mouse is over square: port.write('H'); } else { // return the box to it's inactive state: stroke(153); fill(153); // send an 'L' to turn the LED off: port.write('L'); mouseOverBox = false; } // Draw the box
Background image of page 2
rect(boxX, boxY, boxSize, boxSize); } */ /* { "boxes" : [ { "box" : { "maxclass" : "comment", "text" : "Physical Pixel\n\nThis patch sends an ASCII H or an ASCII L out the serial port to turn on an LED attached to an Arduino board. It
Background image of page 3

Info iconThis preview has intentionally blurred sections. Sign up to view the full version.

View Full DocumentRight Arrow Icon
Image of page 4
This is the end of the preview. Sign up to access the rest of the document.

Page1 / 13

PhysicalPixel - /* Physical Pixel An example of using the...

This preview shows document pages 1 - 4. Sign up to view the full document.

View Full Document Right Arrow Icon
Ask a homework question - tutors are online