Unformatted text preview: 4) Transient Analysis: Run a PSpice simulation of the circuit shown below but having the input voltage source operating as a 1kHz sinusoid with 1mV amplitude. Submit a plot showing the “Input Voltage” and “R2 Voltage Drop” as a function of time from 0 seconds to 5 milliseconds. 5) Transient Analysis: Run a PSpice simulation of the following current divider. Submit a plot showing the R1 current and R2 current as a function of time from 0 seconds to 5 milliseconds. Using a “Cursor” (or marker depending on the selected PSpice simulation tool). Find the peak value of current flowing in the R1 and R2 resistors. Does these value match your hand calculation? R1 2K R2 4K V1 10Vdc R1 2K R2 4k V1 FREQ = 1k VAMPL = 1mV VOFF = 0v R1 2K R2 4k I1 IOFF = 0 FREQ = 1k IAMPL = 1m...
View Full Document
- Fall '10
- Volt, Resistor, Electrical resistance, Electrical impedance, PSPICE simulation