Homework-4 - 2% under any load condition. The AC input...

Info iconThis preview shows page 1. Sign up to view the full content.

View Full Document Right Arrow Icon
Homework #4 (to be due onFeb 18 th , 2008) 1. Designing a full-wave regulated power supply using a center- tapped transformer and a Zener diode. (Assuming the Zener diode has 0.5 zener resistance, r z ) The nominal output voltage of the power supply is 9V. The load current is between 0A and 300mA. The output voltage must be always within 9V
Background image of page 1
This is the end of the preview. Sign up to access the rest of the document.

Unformatted text preview: 2% under any load condition. The AC input voltage is 120V(rms) 60Hz. Please calculate the power loss in the rectifier diodes, current limiting resistor and zener diode. Hint: Please reference Design Problem 2.5, Example 2.6 and section 2.6....
View Full Document

This note was uploaded on 02/07/2011 for the course ECE 2204 taught by Professor Awang during the Spring '08 term at Virginia Tech.

Ask a homework question - tutors are online