This preview shows pages 1–3. Sign up to view the full content.
This preview has intentionally blurred sections. Sign up to view the full version.View Full Document
Unformatted text preview: MM-3PETR 3402Reservoir Rock PropertiesExp 4: PorosityExperiment date: 10/05/2009Report submission date: 10/19/2009Submitted by: Nikhil ThomasJoel SalazarMatt ThompsonDavid YellowleesEXECUTIVE SUMMARYIn this experiment we were to measure and calculate the effective porosity of the core sample. In this experiment we got to use the Vernier Caliper and Helium Porosimeter. This experiment was very simple and step by step directions were given by the instructor before the experiment on how to use the equipment. We were also watched by the instructor when were performing the experiment on the equipment. Each group is given a set number to perform the experiment and in the lab manual for each of the setup numbers there is billet name A, B, C, D, and Es numerical volume is given for each billet name. We started the experiment from measuring the core samples length and diameter. After taking 3 reading for the length we took the average of the length, and we took 5 reading for the diameter of the core sample and found the average for diameter. After that we used the helium porosimeter and setup number 1. There the average for diameter....
View Full Document
This note was uploaded on 02/17/2011 for the course PETR 3402 taught by Professor Siddiqui during the Spring '08 term at Texas Tech.
- Spring '08